Printers and scanners that
work with Glintium POS.

Glintium POS prints to standard ESC/POS receipt printers and scans barcodes with the device camera or a dedicated scanner. We verify real units against the app before recommending them — here's what we know works, and exactly how to set it up.

Barcode scannersReceipt printers

✅ Barcode scanners — verified with Glintium POS

The camera scans product barcodes on every plan. A dedicated scanner is for counters that scan all day — convenience stores, bottle shops, newsagents. Scanner support arrives with Glintium POS 1.0.5; on 1.0.4 the camera keeps working.

NETUM NT-1228BL — recommended

Cordless 2D scanner, about A$75 on Amazon Australia. Reads 1D and 2D codes, including customer and order codes off a phone screen, and works with iPhone, iPad and Android tills. Verified on our own unit: pairs from inside the app, reconnects by itself after it sleeps, and scans straight into the sale from any screen.

Keep the scanner you already own

Any USB barcode scanner that types what it scans plugs into an Android tablet through a small USB-C adapter hub (sold as an "OTG hub"), and any Bluetooth scanner of that kind pairs in your tablet's Bluetooth settings. Then switch on Use a USB or keyboard-mode scanner in Glintium POS under Settings → Hardware → Barcode scanner. Scans go to the sale even while a text field is open — they never type into it. Verified on our own bench with the NETUM NT-M1 corded laser gun (about A$30 on Amazon Australia) through a USB-C hub on an Android phone. On iPad, iPadOS hides the on-screen keyboard while a keyboard-mode scanner is attached (tap the keyboard icon bottom-right to bring it back) — the cordless NETUM in app mode avoids that.

Set up the NETUM NT-1228BL — five minutes

  1. 1

    Charge it, then unplug it

    Charge from the USB cable, then unplug. On a cable the scanner turns into a wired keyboard and hides from Bluetooth.

  2. 2

    Scan barcode A

    "Working via Bluetooth". The scanner beeps and its light flashes — if nothing happens, hold the trigger a moment longer and try again.

  3. 3

    Scan barcodes B and D

    "App mode", then "Sleep after 30 minutes". The scanner beeps and flashes after each. You will see it for certain in the next step: the app lists it under Find scanners.

  4. 4

    Connect in the app

    Pull the trigger to wake it (it switches off after a minute idle). In Glintium POS: Today → Barcode scanner → Find scanners → NT scanner LE → Connect. Don't pair it in the phone's Bluetooth settings — the app does that.

  5. 5

    Test

    Scan a product under Test on the same screen. From then on it scans into the sale from any screen, and reconnects on its own when it wakes up.

Scan these straight off the screen — the NT-1228BL reads screens — or print this page and keep it in the drawer. Each barcode is the scanner's own setup command.

Setup barcode A: Working via Bluetooth

A · Working via Bluetooth

Out of the box the scanner talks to the USB dongle in its box, not Bluetooth. This moves it to Bluetooth.

%#IFSNO$4

Setup barcode B: App mode

B · App mode

Lets Glintium POS talk to the scanner directly (the technical name is "BLE mode"). Skip this and the app never sees it.

AT+MODE=3

Setup barcode C: Un-pair Bluetooth

C · Un-pair Bluetooth

Only if the scanner was paired to another phone or laptop before: scan this, forget "Netum Bluetooth" on that device, then do A and B again.

%%ALL-CH

Setup barcode D: Sleep after 30 minutes

D · Sleep after 30 minutes

Recommended for a counter. Out of the box the scanner sleeps after one idle minute; the first trigger pull after a sleep wakes it and the app reconnects in a second or two, but that first scan is lost. This makes it rare.

$RF#ST60

Setup barcode E: Never sleep

E · Never sleep

For a busy counter that charges the scanner every night. Uses more battery than D.

$RF#ST00

Setup barcode F: Back to keyboard mode

F · Back to keyboard mode

Going back to a plain Bluetooth keyboard scanner (pairs as "Netum Bluetooth" in the phone's Bluetooth settings). Not needed for Glintium POS.

AT+MODE=2

Scanner troubleshooting

Find scanners shows nothing

A slow blue blink means the scanner is still in keyboard or dongle mode. Scan A, then B, pull the trigger, and tap Find scanners within a minute. It must be unplugged from any USB cable.

My phone lists it as “Netum Bluetooth” in Bluetooth settings

That is keyboard mode. Forget it in the phone's Bluetooth settings, scan C (Un-pair), then A and B, and connect from inside the app instead.

It says Disconnected after a quiet spell

The scanner went to sleep (one idle minute out of the box). Pull the trigger: it wakes, the app reconnects by itself within a second or two, and the next scan goes through. Scan D so it stays awake for 30 minutes between customers, or E to never sleep. Don't leave it on a USB cable to avoid this — on a cable it becomes a wired keyboard.

It says Connected but nothing happens when I scan

Open Today → Barcode scanner and scan under Test. A code shown there is proof the link works; it does not go to the sale on purpose. Go back to Sell and scan again — a known product is added to the sale, an unknown one opens the item form with the barcode filled in.

Which products scan?

Anything with a retail barcode (EAN-13, EAN-8, UPC). A product the shop has not sold before opens the item form with its barcode and, where we know it, its name — type the price once and it's a tile from then on.

✅ Receipt printers — verified with Glintium POS

Glintium POS prints to standard ESC/POS thermal receipt printers over Bluetooth (Android tills) or Wi-Fi/Ethernet.

Element RW60+

80 mm thermal printer with auto-cutter, cash-drawer port, and every connection type: Bluetooth, Wi-Fi, Ethernet, USB and Serial (takes 58 mm paper too). Verified end-to-end on our own unit: receipts, auto-cut, and cash-drawer kick over both Bluetooth and wired network. Around A$249, stocked by Australian POS suppliers (SKU PRELRW60006).

Cash drawers

Any standard 24 V RJ12 cash drawer plugs into the printer's drawer port — Glintium POS opens it automatically on cash sales and refunds. Verified with the VPOS EC410.

Expected compatible (not yet verified)

Epson TM-T82 series — Australia's most common counter printer. It speaks native ESC/POS, and the Ethernet models use the same network printing standard Glintium POS uses, so it should work as-is. We'll mark it verified once we've tested a real unit.

Budget 58 mm Bluetooth printers

The generic A$40–60 58 mm Bluetooth printers (eBay and similar) mostly speak ESC/POS and are expected to work on Android tills — set paper width to 58 mm in the app. Quality varies by unit and most have no cutter or drawer port; if you're buying new, the verified list above is the safe choice.

⚠ Star TSP100 / TSP143

Star printers use Star's own protocol by default, not ESC/POS. The TSP143IV can be switched into ESC/POS emulation; older TSP100III units generally can't. If you already own one, ask us before assuming it will work.

Printer setup notes

Bluetooth or network?

Both are free on every plan. Bluetooth is the quickest start on an Android till. A wired (Ethernet) or Wi-Fi printer works from any till on the same network — and is the option for iPhone/iPad tills.

How do I connect it?

Bluetooth: pair the printer in your device's Bluetooth settings, then pick it in Glintium POS under Settings → Hardware → Receipt printer. Network: plug in the cable (or join the printer to your Wi-Fi), hold the printer's feed button to print its own test page, and copy the address it prints (four numbers with dots, like 192.168.1.50) into the same screen.

Does the printer need the internet?

No. Printing is local — receipts print even with no internet connection at all.